IFU

Operah plus

nice 5000 RP

nice 5000 RP is designed to provide essential thermal care, respiratory support, and jaundice treatment for premature babies, neonates, and infants up to 10 kg. It delivers controlled radiant heat to maintain body temperature, blue LED phototherapy for the effective treatment of hyperbilirubinemia, and a gas-powered T-piece resuscitator to support newborns with breathing difficulties during the critical post-natal period.

Operah lite

nice 2007 SW

Infant Radiant Warmers provide an open and accessible care environment while delivering controlled radiant heat to maintain the newborn’s body temperature within the desired range. Using i-sense Technology and servo-controlled heating, it helps to prevent both hypothermia and hyperthermia during examination, resuscitation, and routine neonatal care.

Operah

nice 2010 BC

Infant Radiant Warmers provide an open and accessible care environment while delivering controlled radiant heat to maintain the newborn’s body temperature within the desired range. Using i-sense Technology and servo-controlled heating, it helps to prevent both hypothermia and hyperthermia during examination, resuscitation, and routine neonatal care.

Operah

nice 2010

Infant Radiant Warmers provide an open and accessible care environment while delivering controlled radiant heat to maintain the newborn’s body temperature within the desired range. Using i-sense Technology and servo-controlled heating, it helps to prevent both hypothermia and hyperthermia during examination, resuscitation, and routine neonatal care.

Operah

nice 2007 S

Infant Radiant Warmers provide an open and accessible care environment while delivering controlled radiant heat to maintain the newborn’s body temperature within the desired range. Using i-sense Technology and servo-controlled heating, it helps to prevent both hypothermia and hyperthermia during examination, resuscitation, and routine neonatal care.

Operah lite

nice 2000 B

Infant Radiant Warmers provide an open and accessible care environment while delivering controlled radiant heat to maintain the newborn’s body temperature within the desired range. Using i-sense Technology and servo-controlled heating, it helps to prevent both hypothermia and hyperthermia during examination, resuscitation, and routine neonatal care.

Operah lite

nice 2000

Infant Radiant Warmers provide an open and accessible care environment while delivering controlled radiant heat to maintain the newborn’s body temperature within the desired range. Using i-sense Technology and servo-controlled heating, it helps to prevent both hypothermia and hyperthermia during examination, resuscitation, and routine neonatal care.

Mitraa

nice 2020

The Infant Swaddle Warmer is designed to provide safe, uniform warmth to newborns through a soft swaddling system, reducing heat loss while ensuring comfort and stability. It supports effective thermoregulation during routine care, post-delivery observation, and short-term warming needs in NICUs and postnatal wards.

Sapphire

nice 4000 LED

nice 4000 LED Infant Phototherapy provides blue LED light (450-465nm) treatment for new-borns with hyperbilirubinemia, featuring 9 high-power blue LEDs delivering >45µW/cm²/nm irradiance at 30cm across 50x30cm effective area. Includes 4 white observation LEDs and no infrared rays to minimize water loss; height-adjustable aluminium stand positions over bassinets, incubators, or radiant warmers.

Seefar

nice 4000 SPOT

nice 4000 SPOT delivers intensive overhead phototherapy using 24 high-power blue LEDs (450-465nm) across a 60x50cm effective treatment area, providing >45µW/cm²/nm irradiance at 30cm distance. Three white observation LEDs enable continuous infant monitoring while 3 white observation LEDs maintain caregiver visibility. No infrared rays minimize water loss during extended NICU treatments.

Seefar

nice 4005 SPOT

nice 4005 SPOT provides under surface phototherapy using 24 high-power blue LEDs (450-465nm) delivering >45µW/cm²/nm irradiance with effective area. Three white observation LEDs enable continuous monitoring while no infrared rays minimize infant water loss. Designed for bassinets, incubators, and radiant warmers, it maximizes skin exposure for faster bilirubin reduction.​

Bili Flex

nice 4060

nice 4060 Bili Flex wraps infants in high-intensity blue LED light delivered through biocompatible fiber optic pad, enabling continuous jaundice therapy during kangaroo mother care and transport. Variable intensity control and flexible cable design ensure comfortable positioning without heat interference. Optimized for preterm and low birth weight infants requiring mobile phototherapy solutions.

Marvel

nice 9000

nice 9000 is an neonatal ventilator designed to deliver precise and reliable respiratory support for infants requiring assisted ventilation. Engineered with accurate pressure and volume control, it ensures stable breathing support while prioritizing infant safety, comfort, and clinical efficiency in critical care environments.

Marvel Plus

nice 9010

nice 9010 is a versatile ventilator engineered to provide consistent and controlled ventilation for both neonates and pediatric patients. It supports a wide range of clinical needs with accurate pressure and volume delivery, ensuring safe and effective respiratory management while maintaining patient comfort and stability.

Marvel Pro

nice 9020

nice 9020 is an advanced adult ventilator engineered to provide accurate and consistent respiratory support for patients requiring assisted ventilation. It delivers controlled airflow and oxygen delivery to support effective breathing, helping clinicians manage a wide range of respiratory conditions with confidence and stability.

Marvel NIV

nice 5060 F

The OxyPAP NIV Ventilator is an advanced non-invasive ventilation platform designed to deliver comprehensive respiratory support across neonatal and pediatric care. Supporting HFNC, Bubble CPAP, NIPPV, NISPPV, nCPAP, and T-Piece Resuscitation, it provides effective lung-protective therapy while enhancing patient comfort.

OxyPAP

nice 5060

nice 5060 Bubble CPAP maintains lung volumes in spontaneously breathing newborns via nasal interfaces with precise PEEP (3-10 cmH2O) generated by bubble mechanism. Features digital pressure manometer, highly accurate air-oxygen blender (21-100% FiO2), servo-controlled humidifier, and strong aluminum stand with dovetail grooving.

OxyPAP

nice 5060 S

nice 5060 S Bubble CPAP System is a neonatal respiratory support solution designed for spontaneously breathing new-borns requiring continuous positive airway pressure. With its integrated air-oxygen blender and bubble-generated PEEP mechanism, the system maintains stable airway pressure to support alveolar recruitment, prevent lung collapse, and reduce the work of breathing.

HFOT

nice 5060 S

High Flow Oxygen Therapy provides controlled delivery of air and oxygen at higher flow rates than conventional oxygen therapy, ensuring accurate FiO₂ with optimal temperature and humidity. The system improves patient comfort by reducing airway dryness, maintaining mucociliary function, and supporting effective oxygenation during respiratory distress.

HornPuff

nice 5020

nice 5020- The Hornpuff Infant T-Piece Resuscitator is a gas-powered neonatal resuscitation device. The resuscitation is thumb-operated and can be performed by delivering preset and controlled Peak Inspiratory Pressure (PIP) and Positive End-Expiratory Pressure (PEEP). The device supports a maximum gas inlet flow of 15 LPM, offers IPX4 protection against ingress, and connects to a face mask or other interfaces for regulated, pressure-limited gas delivery.

HornPuff iBlend

nice 5020

nice 5020 Infant T-Piece Resuscitator provides thumb-operated manual ventilation using PIP and PEEP at 0-15 LPM flow range. Features built-in air-oxygen blender (21-100% FiO2), accurate manometer, and variable pressure relief valve for precise neonatal resuscitation.

HornPuff System

nice 5020

nice 5020 Infant T-Piece Resuscitator provides thumb-operated manual ventilation using PIP and PEEP controls at 15 LPM. Features strong SS stand with dovetail grooving, precise air-oxygen blender (21-100% FiO2), and servo-controlled humidifier for neonatal resuscitation.

MARS

nice 5001

nice 5001 is a high-performance medical air compressor designed to deliver clean, oil-free, and continuous medical air for critical respiratory care applications. Built to meet medical air quality standards, it ensures safe, dry, and contamination-free air supply for ventilators, CPAP, and neonatal respiratory devices, supporting effective therapy and patient safety across clinical environments.

OxyM

nice 5010

nice 5010 High Flow Air Oxygen Blender provides accurate blending of medical air and oxygen for Bubble CPAP, ventilators, SiPAP, resuscitators, and high-flow therapy up to 120 LPM. Engineered with rigid aluminum body, highly precise mechanical components, and non-interchangeable air/oxygen inlet ports.

OxyM

nice 5005

nice 5005 is an advanced low-flow Air Oxygen Blender designed for neonatal intensive care units, providing accurate blending of medical air and oxygen to achieve precise FiO₂ concentrations from 21% to 100%. Engineered with a robust aluminium body and highly precise mechanical components, it ensures reliable performance for Bubble CPAP, ventilators, SiPAP, resuscitators, and other low-flow respiratory applications.

iSmart

nice 8050

nice 8050 is an advanced servo-controlled humidifier for hospital ICUs, providing optimal humidity via endotracheal tubes or nasal interfaces. Featuring invasive/non-invasive modes with precise temperature/flow detection, dual heating systems, and smart condensation algorithms, it supports CPAP, ventilators, and high-flow therapy across neonates to adults with reliable performance.

iSmart

nice 8010

Heated respiratory humidifier for non-invasive therapy providing optimal gas humidification in neonatal care. nice 8010 is a compact heated respiratory humidifier for hospital ICUs, humidifying gases via nasal prongs for non-invasive therapy. Dual heating maintains precise temperatures (40-50°C) with ambient compensation. Compatible with CPAP, ventilators, and high-flow up to 120 LPM for neonates to adults.

Infant weighing scale

nice 1000

nice 1000 – The Infant Weighing Scale offers precise weight measurement with 5-gram accuracy, enabling reliable monitoring of even very low birth weight (VLBW) infants under 1.5 kg. Equipped with inbuilt height measurement, it allows easy tracking of growth patterns. Features like Tare and Zero functions ensure accurate weight readings without including accessories, while instantaneous measurement and a maximum capacity of 20 kg make it ideal for use in NICU and PICU settings. The scale operates on both AC and DC supply, providing flexibility and uninterrupted operation in critical care environments.

Infant weighing scale N

nice 1000 N

The infant weighing scale delivers precise and repeatable weight measurements critical for fluid management, medication dosing, and close monitoring of weight trends in neonates, including very low birth weight infants.

Infantometer

nice 1050

nice 1050 – The Infantometer is designed for accurate measurement of an infant’s length from the top of the head to the heel. It features a large, smooth FRP base that provides a stable and comfortable surface for the baby during measurement. The one-sided sliding adjustment allows easy and precise positioning, ensuring consistent and reliable length measurement in clinical environments.

Font

nice 4050

nice 4050 – Fiber Optic Neonatal Transilluminator delivers high-intensity cool LED illumination for clear visualization of veins in neonates, infants, and pediatric patients. Designed to support accurate phlebotomy, the device enhances vein visibility through the skin, enabling faster and more confident bedside procedures.

OPAL

nice 5040

nice 5040 – Engineered for dependable oxygen monitoring, the Oxygen Analyser employs an electrochemical sensor that delivers accurate, low-drift measurements with minimal power consumption. Its resistance to interfering gases and reliable detection performance make it a trusted, cost-effective solution for clinical oxygen concentration assessment.

RAY

nice 4020

The Phototherapy Radiometer accurately detects the therapeutic light intensity of the blue spectrum during neonatal phototherapy for hyperbilirubinemia. This battery-operated, portable device precisely measures irradiance and dosage levels delivered to the infant, ensuring effective treatment while remaining easy to transport and deploy across clinical settings.

RAN

nice 5050

nice 5050 – The Respiratory Monitor is designed to continuously monitor infant respiration using a highly sensitive pneumatic sensor attached to the baby’s chest or abdomen. The sensor detects even minute movements of the skin, enabling reliable identification of each respiration cycle or breath.

Oxygen Hood

O2 Hood - Acrylic

The Oxygen Hood (Head Box) is engineered to deliver a controlled oxygen-rich environment for neonates, infants, and paediatric patients requiring respiratory support. Its clear, ergonomic design allows continuous patient observation while ensuring gentle and uniform oxygen administration for enhanced comfort and clinical confidence.

Oxygen Hood

O2 Hood - Moulded

nice 6000 M

nice 6000 M

The Baby Bassinet features an innovative, integrated design developed to support the observation and transportation of neonates within clinical environments. Its construction enables caregivers to monitor infants comfortably while maintaining smooth mobility during routine transfers.

Infant Observation Trolley

nice 6000

Venturi Slow Suction

50-05-098

Venturi Slow Suction is designed to apply negative pressure for the effective absorption of mucus from the patient’s lungs. At the same time, it supports the delivery of humidified oxygen, helping maintain patient comfort during suctioning procedures.

Precision electrical slow suction device

88-00-037

The Electrical Slow Suction unit is designed to provide controlled low-flow suction using negative pressure, making it ideal for gentle aspiration of fluids and secretions in respiratory management. Engineered for clinical workflows, this electrically powered system ensures consistent performance with quiet operation and dependable suction, supporting effective airway clearance in sensitive care settings.

Cephra Gel

20-05-202/203/204

A soft, ergonomically designed support system that provides simultaneous head and shoulder positioning, helping maintain proper alignment while enhancing comfort during neonatal care and clinical procedures. Disposable head positioning covers and suitable head positioning pillows are available in various sizes for optimal usage.

Neonatal Single Heated Circuit + Water Trap

BC 555

The Bubble CPAP breathing circuit is a patient gas delivery system designed to provide continuous positive airway pressure to neonates and infants with respiratory distress. It delivers a controlled blend of air and oxygen at a prescribed flow rate through a bubbling mechanism.

Neonatal Heated Bubble CPAP Circuit

BC 510

The Bubble CPAP breathing circuit is a patient gas delivery system designed to provide continuous positive airway pressure to neonates and infants with respiratory distress. It delivers a controlled blend of air and oxygen at a prescribed flow rate through a bubbling mechanism.

Neonatal Heated Wire Circuit

BC 525

The Bubble CPAP breathing circuit is a patient gas delivery system designed to provide continuous positive airway pressure to neonates and infants with respiratory distress. It delivers a controlled blend of air and oxygen at a prescribed flow rate through a bubbling mechanism.

Neonatal Heated CPAP Circuit w/ Chamber (T – Bar Prongs )

BC 530

The Bubble CPAP breathing circuit is a patient gas delivery system designed to provide continuous positive airway pressure to neonates and infants with respiratory distress. It delivers a controlled blend of air and oxygen at a prescribed flow rate through a bubbling mechanism.

Silicone Neonatal Heated wire Circuit

BC 560

BC 560 Silicone Infant/Neonatal Breathing Circuit with heated wire fits nice 5060 Bubble CPAP and equivalents, featuring optional mini flow tube and patient interfaces. Made from polysulphone and silicone, it complies with ISO 10993/18562 biocompatibility standards. Versatile for all Bubble CPAP therapy equipment.

Bubble CPAP Breathing Circuit

BC 570

The Bubble CPAP breathing circuit is a patient gas delivery system designed to provide continuous positive airway pressure to neonates and infants with respiratory distress. It delivers a controlled blend of air and oxygen at a prescribed flow rate through a bubbling mechanism.

Neonatal Heated Circuit w / Water trap

BC 515

Ventilator breathing circuits are patient gas delivery systems designed to connect mechanical ventilators to patients for the delivery of controlled respiratory support. The circuits direct a prescribed mixture of air and oxygen from the ventilator to the patient and return exhaled gases back to the ventilator, ensuring safe and efficient ventilation.

Neonatal SLE Circuit w/ Water Trap

BC 545

Ventilator breathing circuits are patient gas delivery systems designed to connect mechanical ventilators to patients for the delivery of controlled respiratory support. The circuits direct a prescribed mixture of air and oxygen from the ventilator to the patient and return exhaled gases back to the ventilator, ensuring safe and efficient ventilation.

Neonatal SiPAP Heated circuit

BC 590

Designed to deliver medical gases with optimum humidity from respiratory devices to premature babies, neonates, and infants receiving SIPAP therapy. The circuit supports effective respiratory management in neonatal intensive care environments.

Disposable Ventilator Circuit

BC 520

Ventilator breathing circuits are patient gas delivery systems designed to connect mechanical ventilators to patients for the delivery of controlled respiratory support. The circuits direct a prescribed mixture of air and oxygen from the ventilator to the patient and return exhaled gases back to the ventilator, ensuring safe and efficient ventilation.

Patient Interface

BC 565

BC 565 Silicone Infant/Neonatal Breathing Circuit delivers optimal humidification for ventilators, featuring spiral heated wires, exhalation water trap, and inclusive chamber with preset pressure manifold (>20 cmH2O relief valve). Polysulphone/silicone materials meet ISO 10993/18562 biocompatibility; optional CPAP nasal prongs available.

Neonatal Heated Circuit w / Chamber

BC 535

Ventilator breathing circuits are patient gas delivery systems designed to connect mechanical ventilators to patients for the delivery of controlled respiratory support. The circuits direct a prescribed mixture of air and oxygen from the ventilator to the patient and return exhaled gases back to the ventilator, ensuring safe and efficient ventilation.

Neonatal High-Flow Circuit

BC 580

The High Flow Oxygen Therapy breathing circuit is a patient gas delivery system designed to provide heated and humidified air–oxygen mixtures at high flow rates to neonates, infants, and paediatric patients with respiratory distress. It delivers a precise and controlled oxygen concentration at flow rates that meet or exceed the patient’s inspiratory demand.

Neonatal High Flow Circuit Kit

BC 585

The High Flow Oxygen Therapy breathing circuit is a patient gas delivery system designed to provide heated and humidified air–oxygen mixtures at high flow rates to neonates, infants, and paediatric patients with respiratory distress. It delivers a precise and controlled oxygen concentration at flow rates that meet or exceed the patient’s inspiratory demand.

T-Piece Circuit w/ Nebulizer Port

50-05-154

The T-Piece Resuscitator Circuit is intended to deliver controlled positive pressure ventilation (PPV) to neonates and infants with conditions such as respiratory distress with mature lungs, transient breathing difficulty after birth, or inadequate spontaneous respiration requiring assisted ventilation. It is commonly used during neonatal resuscitation, transport, and short-term respiratory assistance in delivery rooms, NICUs, and emergency care settings.

Heated T-Piece Circuit w/ Nebulizer Port

50-05-150

The T-Piece Resuscitator Circuit is intended to deliver controlled positive pressure ventilation (PPV) to neonates and infants with conditions such as respiratory distress with mature lungs, transient breathing difficulty after birth, or inadequate spontaneous respiration requiring assisted ventilation. It is commonly used during neonatal resuscitation, transport, and short-term respiratory assistance in delivery rooms, NICUs, and emergency care settings.

Silicon T-Piece Circuit w/ Nebulizer Port

50-05-160

The T-Piece Resuscitator Circuit is intended to deliver controlled positive pressure ventilation (PPV) to neonates and infants with conditions such as respiratory distress with mature lungs, transient breathing difficulty after birth, or inadequate spontaneous respiration requiring assisted ventilation. It is commonly used during neonatal resuscitation, transport, and short-term respiratory assistance in delivery rooms, NICUs, and emergency care settings.

Paediatric Heated Circuit w/ Water Trap

BC 710

Ventilator breathing circuits are patient gas delivery systems designed to connect mechanical ventilators to patients for the delivery of controlled respiratory support. The circuits direct a prescribed mixture of air and oxygen from the ventilator to the patient and return exhaled gases back to the ventilator, ensuring safe and efficient ventilation.

Paediatric Dual Heated Circuit

BC 720

Ventilator breathing circuits are patient gas delivery systems designed to connect mechanical ventilators to patients for the delivery of controlled respiratory support. The circuits direct a prescribed mixture of air and oxygen from the ventilator to the patient and return exhaled gases back to the ventilator, ensuring safe and efficient ventilation.

Paediatric Single Limb Heated Circuit

BC 725

Paediatric breathing circuits are patient gas delivery systems designed to connect respiratory equipment to patients for the delivery of controlled respiratory support. These circuits deliver a prescribed mixture of air and oxygen to the patient, ensuring safe and efficient.

Disposable Ventilator Circuit

BC 715

Ventilator breathing circuits are patient gas delivery systems designed to connect mechanical ventilators to patients for the delivery of controlled respiratory support. The circuits direct a prescribed mixture of air and oxygen from the ventilator to the patient and return exhaled gases back to the ventilator, ensuring safe and efficient ventilation.

Paediatric Heated Circuit w/ Water Trap & Chamber

BC 730

Ventilator breathing circuits are patient gas delivery systems designed to connect mechanical ventilators to patients for the delivery of controlled respiratory support. The circuits direct a prescribed mixture of air and oxygen from the ventilator to the patient and return exhaled gases back to the ventilator, ensuring safe and efficient ventilation.

Paediatric Dual Limb w/ Water Trap & Chamber

BC 735

Ventilator breathing circuits are patient gas delivery systems designed to connect mechanical ventilators to patients for the delivery of controlled respiratory support. The circuits direct a prescribed mixture of air and oxygen from the ventilator to the patient and return exhaled gases back to the ventilator, ensuring safe and efficient ventilation.

Adult Dual Limb w/ Water Trap & chamber

BC 640

Ventilator breathing circuits are patient gas delivery systems designed to connect mechanical ventilators to patients for the delivery of controlled respiratory support. The circuits direct a prescribed mixture of air and oxygen from the ventilator to the patient and return exhaled gases back to the ventilator, ensuring safe and efficient ventilation.

Adult Dual Heated Circuit w/ Chamber

BC 645

Ventilator breathing circuits are patient gas delivery systems designed to connect mechanical ventilators to patients for the delivery of controlled respiratory support. The circuits direct a prescribed mixture of air and oxygen from the ventilator to the patient and return exhaled gases back to the ventilator, ensuring safe and efficient ventilation.

Adult Single Limb w/ Heated Wire & Chamber

BC 650

Ventilator breathing circuits are patient gas delivery systems designed to connect mechanical ventilators to patients for the delivery of controlled respiratory support. The circuits direct a prescribed mixture of air and oxygen from the ventilator to the patient and return exhaled gases back to the ventilator, ensuring safe and efficient ventilation.

Bubble CPAP Nasal Prongs

98-00-110/111/112/113/114/115/116

Available in seven sizes (Micro 98-00-110, Small 98-00-111, Medium 98-00-112, Medium Wide 98-00-113, Large 98-00-114, Large Wide 98-00-115, X Large 98-00-116), these prongs connect to flow tubes with high-profile design and optimal lengths for comfortable gas supply. Contoured fit matches patient nares specifically, while two slots secure to head bonnets for stable positioning.

CPAP Nasal Ventilator Prongs

50-05-099/100/101

CPAP Nasal Prongs are designed to provide non-invasive respiratory support by delivering continuous positive airway pressure from a ventilator to neonatal and infant patients. The prongs design ensures stable positioning and minimizes movement during therapy, helping maintain consistent airway pressure.

CPAP Nasal T-bar Prongs

98-00-129/130/131/132/143

Available in Sizes 0-4, these prongs feature short tubes with inhalation/exhalation ports and ‘L’ connectors for secure breathing circuit attachment. The contoured design fits specifically to patient nares, while high-profile structure and appropriate lengths ensure comfortable gas delivery.

CPAP Nasal Mask

98-00-133/134/135/136

Available in Small (98-00-133), Medium (98-00-134), Large (98-00-135), and X-Large (98-00-136), these masks feature anatomical curves that seal tightly over infant nares to prevent leaks during Bubble CPAP treatment. Soft silicone layers ensure smooth, irritation-free contact, while slots securely fix flow tubes and head bonnets for reliable positioning.

Flow Tube

76-00-045

Bubble CPAP Flow Tube with Fixing Pillow: connects nasal interfaces to circuits, cushions newborn head, separates inspiratory/expiratory flow. The Bubble CPAP Flow Tube interfaces nasal masks/prongs with breathing circuits using a non-kinkable 10M 7mm ID corrugated tube and 10mm adaptor. Made of flexible, soft, biocompatible material with low flow resistance to minimize dead space. Fixing pillow (76-00-045) cushions sensitive newborn skin against tube compression.

Head Bonnet

76-00-003/006/007/008/009/010/011/012

Available in Small (17- 21 cm), Medium (21-25 cm), Large (25-30 cm) and X Large (30-36 cm) these bonnets feature open tops for ultrasound probe access without disruption.

CPAP Interface Training Kit

50-05-105

Provides complete neonatal interfaces for hands-on selection, fixation training, and Bubble CPAP therapy practice. This all-in-one kit contains Nasal Prongs (7 sizes), T-Bar Prongs (5 sizes), Nasal Masks (4 sizes), Head Bonnets (8 sizes), Mini Flow Tube with fixing pillow, Head/Nasal Measurement Tape, and Interface Fixing Guide for comprehensive training.

Resuscitation mask

98-00-124/125/126

Infant resuscitation face mask designed for secure fit and effective ventilation during critical care. Resuscitation face masks are used for infant respiratory support and connect to circuits. They fit over the patient’s nose and are available in sizes 00, 0, and 1

Phototherapy Eye Pad – Elastic

76-00-030/031/032

Phototherapy Eye Pads are designed to protect an infant’s eyes during blue-light phototherapy treatment for jaundice. The pads block direct penetration of therapeutic blue light to prevent retinal exposure while ensuring comfort and safety.

Phototherapy Eye Pad - Hookable

76-00-059/060/061

Eye pad helps protecting the infant’s eye during the phototherapy treatment for jaundice affected infants. Phototherapy Eye Pads are designed to protect an infant’s eyes during blue-light phototherapy treatment for jaundice. The pads block direct penetration of therapeutic blue light to prevent retinal exposure while ensuring comfort and safety.

Disposable Auto Feed Chamber

80-05-015/016

Advanced humidifier chamber engineered for precise, stable, and reliable respiratory gas conditioning. The Humidifier Chamber is designed to deliver controlled humidification with uncompromising consistency in demanding clinical environments. Built to support optimal moisture delivery, it plays a critical role in maintaining patient comfort while preserving the integrity of respiratory gas therapy.

Adult/Pediatric Polysufone Chamber

nice 8030

The Polysulfone Humidifier Chamber is designed to deliver reliable and controlled humidification in demanding clinical environments. Manufactured from high-grade polysulfone, it offers exceptional thermal stability, clarity, and resistance to repeated heating cycles, supporting consistent performance throughout therapy.

Inafnt/Neonatal Polysufone Chamber

nice 8020

The Polysulfone Humidifier Chamber is designed to deliver reliable and controlled humidification in demanding clinical environments. Manufactured from high-grade polysulfone, it offers exceptional thermal stability, clarity, and resistance to repeated heating cycles, supporting consistent performance throughout therapy.

Maxflow Kids

50-05-113/114/115/116/261

High Flow Nasal Cannula is a non-invasive respiratory interface designed for preterm, neonatal, infant, and paediatric patients. It delivers precisely controlled, heated, and humidified air–oxygen mixtures at high flow rates to support spontaneous breathing during high flow oxygen therapy.

Maxflow Adult

50-05-172/178/179

Maxflow Adult Nasal Cannula is engineered to provide high-flow oxygen therapy while maximizing patient comfort and clinical reliability. Designed for adult patients requiring sustained oxygen delivery, it supports faster recovery and helps reduce the need for invasive respiratory interventions.

Preset Pressure Manifold

50-05-109/155/170

The Preset Pressure Manifold is engineered to provide stable and predefined pressure regulation in clinical applications. Its fixed-pressure configuration supports dependable performance where consistent pressure delivery is essential for safe and controlled system operation.

Incubator Iris Port

76-00-049

The Iris Port is designed to provide controlled access to the infant inside the incubator while maintaining stable thermal and humidity conditions. It enables caregivers to perform routine care and clinical procedures efficiently without fully opening the incubator canopy.

Fibre Optic Blanket Cover

76-00-107

The Fibre Optic Blanket covers an effective 20cm x 33cm treatment area, integrating seamlessly with nice 4060 Blanket Phototherapy units to reduce bilirubin counts efficiently. A long, flexible fibre optic cable maintains consistent light intensity without loss, secured by a reliable lock for stable positioning during use.

Respiration Sensor

88-00-107

The disposable apnea respiratory sensor is designed for precise monitoring of neonatal and infant respiration by detecting subtle chest and abdominal movements. Its pneumatic sensor capsule, taped gently to the baby’s abdomen, accurately captures breathing cycles to support dependable apnea detection in clinical care environments.

Air Compressor Filter

76-00-099

The Air Compress Filter is engineered to ensure clean and reliable air entry into compressor by effectively filtering dust, particulates, and airborne impurities. Designed for integration with respiratory and critical-care equipment, it plays a vital role in maintaining optimal device performance and extending equipment life.

Meconium Aspirator

99-00-303

The Meconium Aspirator is a suction device used to remove meconium from a newborn’s upper airway. It helps keep the airway clear and connects between the suction line and a tracheal tube or suction catheter.

Incubator Air Filter

76-00-037/115

X- Ray Cassette Tray

96-00-019

The X-Ray Tray is designed to enable quick and safe radiographic imaging without disturbing the infant during care. It fits seamlessly into the slot provided under the bed platform of infant radiant warmers, allowing imaging procedures while the baby remains in position.

Humidifier Bottle

50-05-087

The Humidifier Bottle used in infant warmers is designed to provide effective humidification of oxygen or air delivered to neonates during thermal care. It helps prevent drying of the respiratory tract by adding moisture to the gas flow, thereby improving patient comfort and supporting mucociliary function.

Suction Bottle

30-05-068

The suction bottle is engineered for reliable collection of bodily fluids during suction procedures across neonatal, paediatric, and clinical care settings. Its transparent construction allows clear visual monitoring of fluid levels, supporting accurate assessment and safe operation during routine and critical procedures.

Thermal Reflector

76-00-050

The Thermal Reflector is designed to protect temperature sensors from direct radiant heat and surrounding ambient temperature influences during neonatal care. It ensures accurate sensing by shielding the probe from external thermal interference.

Skin Temperature Probe

50-05-239

The Skin Temperature Probe is designed to provide accurate, real-time monitoring of an infant’s skin temperature, enabling effective thermal regulation in neonatal care. By continuously sensing temperature changes, it supports precise control of incubators and radiant warmers, helping maintain the baby’s body temperature within safe limits and reducing the risk of hypothermia or overheating.

Air Temperature Probe

20-05-160

The Air Temperature Probe is designed to accurately measure the air temperature inside incubators and neonatal care environments. By providing real-time temperature feedback, it supports effective thermal regulation, helping maintain a stable and controlled microclimate essential for neonatal comfort and safety.

Auto Loading Trolley

30-05-184

The Auto-Load Trolley is a wheeled platform designed to simplify patient transport. It features automatic folding legs and a stable frame, reducing the need for heavy lifting and improving safety for healthcare staff. Its design ensures smooth movement and reliable support on stable, level surfaces.

Auto Loading Trolley

30-05-183

The Auto-Loading Trolley is a wheeled platform designed to simplify patient transport. It features automatic folding legs and a stable frame, reducing the need for heavy lifting and improving safety for healthcare staff. Its design ensures smooth movement and reliable support on stable, level surfaces.

ICU Collapsible Trolley

30-05-065

The Stainless Steel ICU Transport Incubator Trolley is designed for the safe transportation of newborns during emergencies and inter-hospital transfers. It securely accommodates infant transport incubators, ensuring stability and reliability during neonatal transport.

Skin Temperature Probe

50-05-239

The Skin Temperature Probe is designed to provide accurate, real-time monitoring of an infant’s skin temperature, enabling effective thermal regulation in neonatal care. By continuously sensing temperature changes, it supports precise control of incubators and radiant warmers, helping maintain the baby’s body temperature within safe limits and reducing the risk of hypothermia or overheating.

Air Temperature Probe

20-05-160

The Air Temperature Probe is designed to accurately measure the air temperature inside incubators and neonatal care environments. By providing real-time temperature feedback, it supports effective thermal regulation, helping maintain a stable and controlled microclimate essential for neonatal comfort and safety.

Mattress

87-00-012/139/126/009/008

The Baby Mattress is designed to provide gentle support and enhanced comfort for infants during clinical care. Manufactured using soft PU foam, it ensures effective cushioning while helping maintain infant comfort throughout treatment.

Acrylic Tray

96-00-023

The Acrylic Tray for Under Surface Phototherapy provides a stable and clear platform that enables uninterrupted light delivery from the phototherapy source placed beneath the infant. Its transparent design ensures minimal obstruction, supporting optimal exposure during treatment sessions.

Cozy Gel

20-05-201

Designed to support neonates during phototherapy, Cozy Gel provides a soft, transparent gel surface that enhances treatment efficiency while maintaining optimal comfort and skin protection.

Fibre Optic Blanket Cover

76-00-107

The Fibre Optic Blanket covers an effective 20cm x 33cm treatment area, integrating seamlessly with nice 4060 Blanket Phototherapy units to reduce bilirubin counts efficiently. A long, flexible fibre optic cable maintains consistent light intensity without loss, secured by a reliable lock for stable positioning during use.

Phototherapy Eye Pad – Elastic

76-00-030/031/032

Phototherapy Eye Pads are designed to protect an infant’s eyes during blue-light phototherapy treatment for jaundice. The pads block direct penetration of therapeutic blue light to prevent retinal exposure while ensuring comfort and safety.

Phototherapy Eye Pad - Hookable

76-00-059/060/061

Eye pad helps protecting the infant’s eye during the phototherapy treatment for jaundice affected infants. Phototherapy Eye Pads are designed to protect an infant’s eyes during blue-light phototherapy treatment for jaundice. The pads block direct penetration of therapeutic blue light to prevent retinal exposure while ensuring comfort and safety.

Air Filter

76-00-208

The Air Filter is designed for use in ventilators and respiratory care equipment to help remove dust, airborne particles, and contaminants from the incoming air supply. It supports clean airflow delivery and contributes to reliable device performance.

Oxygen Sensor

89-16-069

The oxygen sensor is designed to accurately measure oxygen concentration in neonatal and clinical environments, supporting safe and effective respiratory care.

Flow Tube

76-00-045

Bubble CPAP Flow Tube with Fixing Pillow: connects nasal interfaces to circuits, cushions newborn head, separates inspiratory/expiratory flow. The Bubble CPAP Flow Tube interfaces nasal masks/prongs with breathing circuits using a non-kinkable 10M 7mm ID corrugated tube and 10mm adaptor. Made of flexible, soft, biocompatible material with low flow resistance to minimize dead space. Fixing pillow (76-00-045) cushions sensitive newborn skin against tube compression.

Neonatal Heated Circuit w / Chamber

BC 535

Ventilator breathing circuits are patient gas delivery systems designed to connect mechanical ventilators to patients for the delivery of controlled respiratory support. The circuits direct a prescribed mixture of air and oxygen from the ventilator to the patient and return exhaled gases back to the ventilator, ensuring safe and efficient ventilation.

Neonatal Dual Heated Circuit w/ Chamber

BC 540

Ventilator breathing circuits are patient gas delivery systems designed to connect mechanical ventilators to patients for the delivery of controlled respiratory support. The circuits direct a prescribed mixture of air and oxygen from the ventilator to the patient and return exhaled gases back to the ventilator, ensuring safe and efficient ventilation.

Disposable Ventilator Circuit

BC 550

Ventilator breathing circuits are patient gas delivery systems designed to connect mechanical ventilators to patients for the delivery of controlled respiratory support. The circuits direct a prescribed mixture of air and oxygen from the ventilator to the patient and return exhaled gases back to the ventilator, ensuring safe and efficient ventilation.

Air Filter

76-00-208

The Air Filter is designed for use in ventilators and respiratory care equipment to help remove dust, airborne particles, and contaminants from the incoming air supply. It supports clean airflow delivery and contributes to reliable device performance.

Oxygen Sensor

89-16-069

The oxygen sensor is designed to accurately measure oxygen concentration in neonatal and clinical environments, supporting safe and effective respiratory care.

Oxygen Pressure Regulator

50-05-133

The Oxygen Pressure Regulator is a medical gas control device used to reduce the high pressure of oxygen supplied from a cylinder or central gas source to a stable and safe working pressure suitable for medical equipment. It ensures consistent oxygen delivery by maintaining a controlled outlet pressure, protecting downstream devices from pressure fluctuations or damage.

Air Pressure Regulator

50-05-132

The Air Pressure Regulator is a medical gas control device used to reduce the high pressure of medical air supplied from a central gas source or compressor to a controlled and consistent outlet pressure suitable for medical equipment. It ensures reliable air delivery by maintaining stable pressure, protecting connected devices from pressure fluctuations.

Flow Tube

76-00-045

Bubble CPAP Flow Tube with Fixing Pillow: connects nasal interfaces to circuits, cushions newborn head, separates inspiratory/expiratory flow. The Bubble CPAP Flow Tube interfaces nasal masks/prongs with breathing circuits using a non-kinkable 10M 7mm ID corrugated tube and 10mm adaptor. Made of flexible, soft, biocompatible material with low flow resistance to minimize dead space. Fixing pillow (76-00-045) cushions sensitive newborn skin against tube compression.

Neonatal Single Heated Circuit + Water Trap

BC 555

The Bubble CPAP breathing circuit is a patient gas delivery system designed to provide continuous positive airway pressure to neonates and infants with respiratory distress. It delivers a controlled blend of air and oxygen at a prescribed flow rate through a bubbling mechanism.

Air Filter

76-00-208

The Air Filter is designed for use in ventilators and respiratory care equipment to help remove dust, airborne particles, and contaminants from the incoming air supply. It supports clean airflow delivery and contributes to reliable device performance.

Breathing Circuit

BC 630

The High Flow Oxygen Therapy breathing circuit is a patient gas delivery system designed to provide heated and humidified air–oxygen mixtures at high flow rates to adult patients with respiratory distress. It delivers a precise and controlled oxygen concentration at flow rates that meet or exceed the patient’s inspiratory demand.

Oxygen Sensor

89-16-069

The oxygen sensor is designed to accurately measure oxygen concentration in neonatal and clinical environments, supporting safe and effective respiratory care.

Oxygen Pressure Regulator

50-05-133

The Oxygen Pressure Regulator is a medical gas control device used to reduce the high pressure of oxygen supplied from a cylinder or central gas source to a stable and safe working pressure suitable for medical equipment. It ensures consistent oxygen delivery by maintaining a controlled outlet pressure, protecting downstream devices from pressure fluctuations or damage.

Air Pressure Regulator

50-05-132

The Air Pressure Regulator is a medical gas control device used to reduce the high pressure of medical air supplied from a central gas source or compressor to a controlled and consistent outlet pressure suitable for medical equipment. It ensures reliable air delivery by maintaining stable pressure, protecting connected devices from pressure fluctuations.

Neonatal High-Flow Circuit

BC 580

The High Flow Oxygen Therapy breathing circuit is a patient gas delivery system designed to provide heated and humidified air–oxygen mixtures at high flow rates to neonates, infants, and paediatric patients with respiratory distress. It delivers a precise and controlled oxygen concentration at flow rates that meet or exceed the patient’s inspiratory demand.

T-Piece Circuit w/ Nebulizer Port

50-05-154

The T-Piece Resuscitator Circuit is intended to deliver controlled positive pressure ventilation (PPV) to neonates and infants with conditions such as respiratory distress with mature lungs, transient breathing difficulty after birth, or inadequate spontaneous respiration requiring assisted ventilation. It is commonly used during neonatal resuscitation, transport, and short-term respiratory assistance in delivery rooms, NICUs, and emergency care settings.

Heated T-Piece Circuit w/ Nebulizer Port

50-05-150

The T-Piece Resuscitator Circuit is intended to deliver controlled positive pressure ventilation (PPV) to neonates and infants with conditions such as respiratory distress with mature lungs, transient breathing difficulty after birth, or inadequate spontaneous respiration requiring assisted ventilation. It is commonly used during neonatal resuscitation, transport, and short-term respiratory assistance in delivery rooms, NICUs, and emergency care settings.

Silicon T-Piece Circuit w/ Nebulizer Port

50-05-160

The T-Piece Resuscitator Circuit is intended to deliver controlled positive pressure ventilation (PPV) to neonates and infants with conditions such as respiratory distress with mature lungs, transient breathing difficulty after birth, or inadequate spontaneous respiration requiring assisted ventilation. It is commonly used during neonatal resuscitation, transport, and short-term respiratory assistance in delivery rooms, NICUs, and emergency care settings.

Resuscitation mask

98-00-124/125/126

Infant resuscitation face mask designed for secure fit and effective ventilation during critical care. Resuscitation face masks are used for infant respiratory support and connect to circuits. They fit over the patient’s nose and are available in sizes 00, 0, and 1

Oxygen Input Hose

30-20-067

The Oxygen Input Hose is a medical gas delivery accessory used to connect an oxygen supply source, such as a cylinder or central pipeline, to medical devices including humidifiers, air-oxygen blenders, ventilators, and respiratory therapy systems. It ensures the safe and uninterrupted transfer of oxygen from the source to the equipment.

Air & O2 Connectors

BSP1/BSP2/BSP3/DIP1/AGP1/AGP2/PXP1/AFP1

Air and oxygen inlet hoses are designed for secure and reliable connections. One end features a universal DISS probe, while the other end can be fitted with BS, DIN, AGA, PARKODEX, or AFNOR connector types, ensuring a secure fit, consistent gas delivery, and dependable performance in clinical environments.

Oxygen Input Hose

30-20-067

The Oxygen Input Hose is a medical gas delivery accessory used to connect an oxygen supply source, such as a cylinder or central pipeline, to medical devices including humidifiers, air-oxygen blenders, ventilators, and respiratory therapy systems. It ensures the safe and uninterrupted transfer of oxygen from the source to the equipment.

Air & O2 Connectors

BSP1/BSP2/BSP3/DIP1/AGP1/AGP2/PXP1/AFP1

Air and oxygen inlet hoses are designed for secure and reliable connections. One end features a universal DISS probe, while the other end can be fitted with BS, DIN, AGA, PARKODEX, or AFNOR connector types, ensuring a secure fit, consistent gas delivery, and dependable performance in clinical environments.

Wall Mounting Bracket-Air Oxygen Blender

50-05-127

The Wall Mounting Bracket is a mechanical accessory designed to securely fix the air-oxygen blender onto a wall surface in clinical and hospital environments. It provides stable support, minimizing the risk of accidental movement, vibration, or detachment during normal operation. Its design supports efficient use of clinical space and organized equipment layout.

Air Input Hose

50-20-171

The Air Input Hose is a medical gas delivery accessory used to connect a medical air supply source, such as a central pipeline or compressor, to respiratory care equipment including air-oxygen blenders, ventilators, CPAP systems, and humidifiers. It ensures a reliable and continuous supply of medical air for proper device operation.

Pole Mounting Bracket – Air Oxygen Blender

50-05-129

Pole Mounting Bracket holds air-oxygen blenders firmly to pole stands with multipoint contact for superior stabilization. Corrosion-free powder-coated aluminium provides ultra-lightweight yet sturdy support for heavy equipment loads.

Rail Mounting Bracket

50-05-140

The Rail Mounting Bracket is a mechanical accessory designed to securely attach the air-oxygen blender to standard medical equipment rails used in neonatal and critical care settings. It provides firm support to prevent accidental movement, vibration, or dislodgement of the blender during normal clinical use.

Temperature probe for Humidifier

80-05-006

Designed for clinical reliability, the temperature probe delivers accurate and stable temperature sensing to support effective thermal management in neonatal and infant care environments. Its responsive sensing element ensures precise measurement, even with minimal temperature variation.

Temperature probe for Humidifier

80-05-003

Designed for clinical reliability, the temperature probe delivers accurate and stable temperature sensing to support effective thermal management in neonatal and infant care environments. Its responsive sensing element ensures precise measurement, even with minimal temperature variation.

Fiber Optic Pad

80-05-014

The Dual Heater Wire Adapter for Disposable Circuit enables precise and dependable connection of two heater wires within disposable circuit systems. Its purpose-built design ensures stable integration while supporting compact and efficient clinical setups

Fiber Optic Pad

80-05-010

The Heater Wire Adapter for Disposable 3-Pin Circuit is designed to enable reliable connection of heater wires within disposable circuit configurations. Its application-specific design supports consistent integration while maintaining compatibility with 3-pin circuit interfaces.

Pole Mounting Bracket – Air Oxygen Blender

50-05-129

Pole Mounting Bracket holds air-oxygen blenders firmly to pole stands with multipoint contact for superior stabilization. Corrosion-free powder-coated aluminium provides ultra-lightweight yet sturdy support for heavy equipment loads.

Heater wire Adapter – 2 pin

80-05-005

The Heater Wire Adapter for Disposable 2-Pin Circuit is designed to enable reliable connection of heater wires within disposable circuit configurations. Its application-specific design supports consistent integration while maintaining compatibility with 2-pin circuit interfaces.

Air Outlet Hose

50-20-220

The Air Outlet Hose is designed to deliver compressed medical air from the air compressor to external respiratory devices such as ventilators, CPAP systems, and humidifiers. It ensures a secure and reliable connection for uninterrupted airflow delivery.

Water collector bottle

99-00-663

The Water Collector Bottle used in compressor systems is designed to trap and collect condensed moisture generated during air compression. By removing excess water from the compressed air, it helps prevent moisture from entering downstream equipment and patient delivery circuits, ensuring consistent and safe air supply.

Air Compressor Filter

76-00-099

The Air Compress Filter is engineered to ensure clean and reliable air entry into compressor by effectively filtering dust, particulates, and airborne impurities. Designed for integration with respiratory and critical-care equipment, it plays a vital role in maintaining optimal device performance and extending equipment life.

Fibre Optic Cable

87-00-063

Designed for clinical accuracy, the fiber optic cable delivers consistent and high-quality light transmission with minimal loss. Its advanced optical construction ensures dependable performance in demanding neonatal and medical applications where precision is essential.

Oxygen Sensor

89-16-069

The oxygen sensor is designed to accurately measure oxygen concentration in neonatal and clinical environments, supporting safe and effective respiratory care.

Respiration Sensor

88-00-107

The disposable apnea respiratory sensor is designed for precise monitoring of neonatal and infant respiration by detecting subtle chest and abdominal movements. Its pneumatic sensor capsule, taped gently to the baby’s abdomen, accurately captures breathing cycles to support dependable apnea detection in clinical care environments.

Pulse Oximeter Probe – Y Sensor

89-16-110

The Pulse Oximeter Probe – Y Sensor is specially designed for neonatal and pediatric patients to measure blood oxygen saturation (SpO₂) and pulse rate with high accuracy. Its Y-shaped sensor design ensures proper alignment and optimal signal detection, supporting reliable monitoring even in low-perfusion conditions commonly seen in newborns.

Pulse-Oximeter Probe

89-16-109

The Pulse Oximeter Probe is designed to accurately measure blood oxygen saturation (SpO₂) and pulse rate, supporting continuous monitoring of a newborn’s respiratory and circulatory status. By providing real-time data, it helps caregivers quickly assess oxygen levels and respond promptly to clinical changes, ensuring safe and effective neonatal care.